Lab Software
Patrick M recently asked me this question and it’s a good one. The short answer is no, but here are several ways to make filtering easier: Hi Patrick, Believe me I wish there was. The only way to quickly ‘filter’ out a broad group of tests is to use a worksheet. You can put up
After helping a site troubleshoot a problem that came up on one of their pc’s, I have a few tips for anyone who might be having similar problems or just wants to optimize their current installation. Symptoms: – Ol Monitor refreshes once and then becomes extremely sluggish, freezes, and has to be terminated with Task
*Note: The SSH process has changed in newer versions of Smarterm and this post is very outdated. Please see this post. Please help.None of our OL_monitors are connecting to Smarterm after a server upgrade.We are no longer using a telnet session in smarterm.We ware using SSH. Remember you should always backup your settings before installing
Eric, I am working on setting up filters in OL_Monitor for one of our hospital sites and seem to be having problems. I have a worksheet set in Options that should include all the possible tests we would like to consider and then I am filtering from there. I would like to include/exclude the following:
I have just uploaded a new version designed to deal with problems navigating the OL Menu. After you install the new version the new method named “WayString” will be selected by default in the advanced options menu: Allow Smarterm to load and refresh and watch the Smarterm window to make sure it successfully gets through
Ol Monitor has been updated for some changes in Misys 6.3. Misys 6.3 adds an option to the report menu to include CID data. The three options are None, All, or CID only. This is what the new prompt looks like: Misys 6.3 prompt.jpg Starting with Ol Monitor version 1.32 there is a 6.3 option
I have added a check in the installer to retain the Misys IP address between installs. It checks both the trial folder if it exists and the full version folder, good for those upgrading from the trial. There is also a check for the .ini file for those upgrading from the trial. Previously the .ini
Have you made any progress with the routine/Null priority issue? To choose a different default priority code: Go to options under the advanced tab, change the letter ‘T’ to whatever other letter you would like. You can also try leaving it blank or leaving just a space in there, but I’m not sure if you
I am still working with getting your software into our site. My director is very excited about the possibilities. We have one question that is a sticking point so far. The way our lab is set up, it is in an L shape and we cannot all see just one monitor no matter how big
We have received our software and are in the process of installation. Currently, we are on Misys 5.4.2.21 and utilize Citrix. I am guessing SmarTerm (we have ver 12.1) will need to be loaded as a fat client on the PC we will be using for OL Monitor. I looked on the CD for specific
